Property ALCommonPlayer.TALCommonPlayer.PumpPriority

From Mitov Wiki Doc
(Difference between revisions)
Jump to: navigation, search
(Automated Syncronization with Documentation)
(Automated Syncronization with Documentation)

Revision as of 00:17, 11 June 2013

This is a Beta Read Only version of this page. Please review and send recommendations to mitov@mitov.com. We will enable the editing as soon as we are happy with the overall Wiki site.

Class: TALCommonPlayer

Contents

Syntax

Delphi:

property PumpPriority : Cardinal read FPumpPriority write FPumpPriority default 0;

C++ Builder:

__property unsigned int PumpPriority = { read=FPumpPriority, write=FPumpPriority, default=0 };

Summary

Specifies the priority of the component as a pump.

Description

TALWavePlayer is capable of pumping data. It means that if no other pumping component is presented, TALWavePlayer will start generating frames, and sending them via its OutputPin. TALWavePlayer is a master level pump. Any pump with a level below master will be ignored and the component will serve as a pump. If there is a pump above maser level, the component will work in slave mode, providing data on the pump request. If the other pump is a master as well, the priority number will be used to determine who will serve as a pump. If both priorities are equal, one of the pumps will be selected to serve as a data pump.


Delphi example:

ALWavePlayer1.PumpPriority := 5;

C++ Builder example:

ALWavePlayer1->PumpPriority = 5;

Visual C++(MFC/Win32) example:

ALWavePlayer1.PumpPriority = 5;

Visual C++/CLI example:

waveLogger1->PumpPriority = 5;

C# example:

waveLogger1.PumpPriority = 5;

VB example:

WaveLogger1.PumpPriority = 5

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox